[. . . ] Do not use meter if it operates abnormally as protection maybe impaired. ⷠDo not use during electrical storms or in wet weather. ⷠDo not apply more than the rated voltage to the meter. [. . . ] ⷠWhen using the probes, keep fingers as far behind the probe tips as possible. Warning - read the instruction manual · To differentiate between hot and neutral in an outlet, insert the NCV tab into each slot in the outlet. The beeper will be much louder on the hot side of the outlet than the neutral. The test lead can also be used to differentiate between the hot and neutral. To return to the autoranging mode, either depress the Range button for greater than 1 second or turn the meter off and then back on again. data Hold Feature Press the Hold button on the side of the meter to toggle in and out of the data hold mode. "HOLD" appears in the upper left of the meter display when data hold is active. Use the data hold feature to lock a measurement reading on the display. press the Hold button again to unlock the display and obtain a real-time reading. Auto Power Off (APO) Feature The meter automatically powers itself down after about 10 minutes of no use. Press any button, and the meter will wake up and display the last reading taken before power down. This feature can be overridden by holding the Range ( ) button while turning the function switch from Off to any other position. When APO is defeated, the "APO" will be removed from the display. Single Conductor only Ensure test leads are disconnected from circuit or components. The meter will sense the level of resistance and beep if the resistance is less than 25 to confirm that continuity is present. service and Replacement Parts: This unit has no user-serviceable parts. [. . . ] This warranty does not cover fuses, batteries or damage from abuse, neglect, accident, unauthorized repair, alteration, or unreasonable use of the instrument. Any implied warranties arising out of the sale of an IDEAL product, including but not limited to implied warranties of merchantability and fitness for a particular purpose, are limited to the above. The manufacturer shall not be liable for loss of use of the instrument or other incidental or consequential damages, expenses, or economic loss, or for any claim or claims for such damage, expenses or economic loss. [. . . ]